Tos-Kurim / Floor Type Milling Machines
 |
FLOOR TYPE MILLING MACHINING CENTRE FU(Q)
MACHINE DESCRIPTION
Basic feature of the Floor type milling machine (Machining Centre) with movable column FU(Q) is its build-up configuration, that enables to use according to the customer´s requirements different types of spindle heads.
|
This machine is designed for chip-machining of materials with a wide range of technological use in operations such as milling, drilling, roughing out, reaming, and threading including thread cutting by chaser. In the basic execution this machine is delivered with control system HEIDENHAIN - iTNC 530, digital drives INDRAMAT - PWD and measuring HEIDENHAIN.
The machine FU(Q) is equipped with a chain-type tool magazine with code position. Looking for and moving the tool into holding position is executed during working operation of the machine. Manual operation of the magazine is placed on its side. The machine is equipped with tool changer for heads interchangeable automatically. The customer can choose from offered line of interchangeable heads.
MAIN TECHNICAL INFORMATION
| Working stroke |
| longitudinal X |
mm |
2 000 - 20 000 á 1000 |
| cross Y |
mm |
1 250 / 1 500 |
| vertical Z |
mm |
1 400 - 2 500 á 200 |
| Programmed Feed Rates in the X, Y, Z axes |
mm.min-1 |
1 - 20 000 |
| Control system- digital |
|
HEIDENHAIN - iTNC 530 |
| Drives - digital |
|
INDRAMAT - PWD |
| Main motor usable output |
kW |
30 |
| Total input required |
kVA |
50 |
| Machine dimensions without magazine |
| length |
mm |
7 060-27 040 |
| width - for stroke Z = 1 250 / 1 500 |
mm |
5 420/5 920 |
| height - for stroke Y = 1 400 - 2 500 á 200 |
mm |
4 000-5 737 |
| Machine weight without magazine |
kg |
25 800-52 200 |
| |
| CHAIN TYPE TOOL MAGAZINE |
| Max. number of tools in a magazine |
|
40 / 60 |
| Max. tool diameter at full magazine |
mm |
130 |
| Max. tool length/weight |
mm / kg |
340 / 25 |
| |
| MAGAZINE OF HEADS |
| Number of heads |
|
2 - 5 |
|
|
|
|
Send to a Friend
Add to Favorites
Home 
Our Principals 
