 |
BED-TYPE MILLING MACHINING CENTRE FSG 80 A
MACHINE DESCRIPTION
The main technical feature of Bed type milling machine (Machining Centre) FS(Q) G is fixed bed with moving table together with traversing spindle headstock in vertical and cross direction.
This machine is designed for chip-machining of materials with a wide range of technological use in operations such as milling, drilling, roughing out, reaming, and threading including thread cutting by chaser.
|
In the basic execution this machine is delivered with control system HEIDENHAIN - iTNC 530, measuring HEIDENHAIN and digital drives INDRAMAT - PWD. The machine FS(Q) G is equipped with a drum tools magazine.
MAIN TECHNICAL INFORMATION
| Table clamping surface A2 |
| width |
mm |
800 |
| length |
mm |
2 000 |
| Table working height |
mm |
500 |
| Max. table load |
kg/m2 |
3 000 |
| Working stroke |
| longitudinal X |
mm |
2 000 |
| cross Y |
mm |
900 |
| vertical Z |
mm |
800 |
| Programmed Feed Rates in the X, Y, Z axes |
mm.min-1 |
5 - 20 000 |
| Spindle speed range |
min-1 |
20 - 4 000 |
| Control system- digital |
|
HEIDENHAIN - iTNC 530 |
| Drives - digital |
|
INDRAMAT - PWD |
| Main motor usable output |
KW |
19,3 |
| Total input required |
kVA |
30 |
| Machine dimensions without magazine |
| length |
mm |
5 244 |
| width |
mm |
4 480 |
| height |
kg |
8 500 |
| |
| DRUM TYPE TOOLS MAGAZINE |
| Max. number of beds |
|
20 |
| Max. tool diameter at full magazine |
mm |
120 |
| Max. tool length/weight |
mm / kg |
300 / 20 |
|
|
|
|
Send to a Friend
Add to Favorites
Home 
Our Principals 
