Tos-Kurim / Milling Machines With Moving Column
 |
TRAVELLING COLLUM MILLING MACHINING CENTRE FF(Q) A
MACHINE DESCRIPTION
Basic feature of the Travelling Column milling machine (Machining Centre) with Interchangeable Heads FF(Q) 100A / 125A-VR/A is its build-up configuration, that enables to use according to the customer´s requirements different types of table lengths and spindle heads. This machine is designed for chip-machining of materials with a wide range of technological use in operations such as
|
milling, drilling, roughing out, reaming, and threading including thread cutting by chaser. In the basic execution this machine is delivered with control system HEIDENHAIN - iTNC 530, measuring HEIDENHAIN and digital drives INDRAMAT - PWD.
The machine FF(Q) 100A / 125A-VR/A is equipped with a chain-type tool magazine with code position. Looking for and moving the tool into holding position is executed during working operation of the machine. Manual operation of the magazine is placed on its side. The machine is equipped with tool changer for heads interchangeable automatically. The customer can choose from offered line of interchangeable heads.
MAIN TECHNICAL INFORMATION
| Table clamping surface |
| width |
mm |
1 000 / 1 250 |
| length |
mm |
3 000-12 000 á 1000 |
| Table working height |
mm |
500 |
| Max. table load |
kg/m2 |
3 000 |
| Working stroke |
| longitudinal X |
mm |
3 200 - 12 200 á 1000 |
| cross Y |
mm |
1 250/1 500 |
| vertical Z |
mm |
1 400 - 2 200 á 200 /2500 |
| Programmed Feed Rates in the X, Y axes |
mm.min-1 |
1 - 20 000 |
| Programmed Feed Rates in the Z axis |
| for stroke 1 400-2 200 |
mm.min-1 |
1 - 20 000 |
| for stroke 2 500 |
mm.min-1 |
1 - 16 000 |
| Spindle speed range |
min-1 |
20 - 4 000 |
| Main motor usable output |
KW |
30 |
| Total input required |
KVA |
60 |
| Machine dimensions |
| length |
mm |
10 955 - 20 635 |
| width |
mm |
5 700 / 5 950 (FF(Q) 100A) |
| |
mm |
5 950 / 6 200 (FF(Q) 125A) |
| height |
mm |
3 615 - 5 357 |
| Machine weight |
Kg |
20 000 - 40 000 |
| |
| CHAIN TYPE TOOL MAGAZINE |
| Max. number of tools in a magazine |
|
40 / 60 |
| |
| MAGAZINE OF HEADS |
|
|
| Number of heads |
|
2 - 5 |
|
|
|
|
Send to a Friend
Add to Favorites
Home 
Our Principals 
