Tos-Kurim / Vertical Milling Machines
 |
VERTIKAL MILLING MACHINING CENTRE FMVQ 36
At the occasion of 5th International Machine Tools Exhibition IMT 2006 company TOS KURIM-OS, a.s. was awarded THE GOLD MEDAL for Vertical Machining Centre FMVQ 36.
MACHINE DESCRIPTION
The machine consists of a fixed bed on which is a movable slide with a cross guideway in longitudinal direction. On the slide is a cross moving column with a vertical guideway, on which the headstock is moving. The tool magazine is fixed on the slide.
|
The workpieces are clamped on the table or rotary changer fixed on the bed. The machine is characteristic by two working areas.
The Machining Centre is designed as a multi – tasking machine for mass production of small-size non-rotary workpieces mainly. The Centre is capable to machine a wide range of materials like steel, cast iron, aluminium alloy etc.
The centre composition is modular and enables various machine configurations with reference to the technological requirements and desired production.
The Centre can be either for separate works or as a part of a Manufacturing Cell or Machining Line.
BASIC MACHINE DATA
| Number of spindles |
|
2 |
| Spindle pitch |
mm |
300 |
| Working stroke |
| in longitudinal direction - axis X |
mm |
300 |
| in cross direction - axis Y |
mm |
360 |
| in vertical direction - axis Z |
mm |
360 |
| Feed speed |
| in axis X |
m.min-1 |
60 |
| in axis Y |
m.min-1 |
60 |
| in axis Z |
m.min-1 |
50 |
| Max. thrust |
| in axis X |
N |
6 000 |
| in axis Y |
N |
6 000 |
| in axis Z |
N |
8 000 |
| Max. spindle speed |
min-1 |
10 000 |
| Max. torque (S1/S6-40%) up to 1500 r.p.m. |
Nm |
70 / 105 |
| Max. power of main drive (S1/S6-40%) |
kW |
11 / 16,5 |
| Spindle taper |
|
HSK – A 63 |
| Storage capacity of tools |
|
48 |
| Max. tool diameter |
mm |
95 |
| Max. tool length |
mm |
250 |
| Max. tool weight |
kg |
6 |
| Max. weight of all tools in magazine |
kg |
160 |
| Time for tool exchange |
s |
5 |
| Total machine input in basic execution without options / with options |
kVA |
45 / 55 |
| Machine weight |
kg |
cca 11 000 |
| Machine built up area |
m2 |
11,7 |
| Area for swarf and water management |
m2 |
6,6 |
BASIC MACHINE EXECUTION – version with two working areas
Machine is delivered in this basic execution:
- machine is suitable to operate in environmental conditions IE 33, according to CSN EN 60721-3-3 with a temperature range between +15 ºC and +35 ºC and air pressure higher than 90 kPa
- elektric equipment for connection to mains - AC 3PE 400V, 50 Hz/TNC
- execution of electric equipment in according to CSN EN 60 204-1
- cross stroke 360 mm
- two working areas
- two-spindle headstock
- spindle pitch 300 mm
- spindles with hollow HSK-A 63 according to CSN ISO 12164-2 (DIN 69063-1), for tool shanks according to ČSN ISO 12164-1, DIN 69893-1
- horizontal tool magazine chain type for 48 tools
- drives for spindles - digital drives SIEMENS
- drives for feeds - digital drives SIEMENS
- control system SIEMENS S 840 D
- indirect measuring of feeds in linear axes
- Czech made hydraulic aggregate and regulation elements
- lubrication aggregate VOGEL
- pneumatics FESTO
- cabin cover with blocking and with protection of manually operated doors
- working area lighting
- two colour painting with combination of colour shadows RAL 7032, 7035 a 5017
OPTIONS
Options for basic machine execution - for extra fee:
- fixed table
- tilting table ( axis A)
- swarf conveyer
- outer low pressure tool cooling
- outer low pressure tool cooling and inner high pressure cooling 40 bar or 65 bar
- equipment for exhaustion of coolant ( aerosol ) out of working area
- container for swarfs
- anchoring material
Alternative machine execution
- direct measuring for feeds in linear axes
- spindle taper for different tool shanks
- for different environmental conditions
- execution for different mains than 400V, 50Hz
- electrical equipment according to different standards
- cooling unit for operating panel (for environmental temperatures above 35 ºC)
- different control system
- different spindle drive
- different feeds drive
- different hydraulic elements
- different pneumatic elements
- different lubrication elements
- different tool cooling
- different swarf management
- different headstock execution
- different colour execution
|
|
|
|
Send to a Friend
Add to Favorites
Home 
Our Principals 
